Print
pj masks layered birthday cake

PJ Masks Cake

Prep

Cook

Total

Yield 1 Cake

Ingredients

Cake

Icing

Instructions

In addition to the edible ingredients, you will also need: 20 cm round cake tin (2 cake tins are even better) Cake mixer or Electric beater, Baking paper, 3 x bamboo skewers, piping bag with large nozzel, PJ masks figurines

  1. Preheat your oven to 160 degrees Celsius (or the temperature recommended on the packet directions of your cake mix, if you have a double oven and 2 cake tins that are the same size then heat 2 ovens, as this will reduce total baking time if you can bake 2 layers at a time
  2. Prepare the vanilla cake as per packet directions, I combine the 2 packs to make a double batch. The number of eggs and amount of butter and milk I have listed were what was required for the cake mix I used, yours may differ slightly. The first quantities of butter and milk listed are for the cakes, the second quantities are for the buttercream icing
  3.  Once you have a double batch of cake mix made, divide this into 6 small/medium mixing bowls (I didn't have enough, but my soup/cereal bowls were fine for the job. I used scales to divide the mix, and found I needed to weigh out approximately 250 g of batter per bowl, this should give you 6 pretty even quantities. If you don't have scales I found it was around 1 and 1/4 to 1 and 1/2 cups of batter per bowl
  4. Use the food colouring to colour the six layers, you will want: Dark blue, light blue, dark green, light green, red and pink (I used blue gel colouring for the 2 blue layers, Green gel colouring for the dark green layer and a combo of green and yellow colouring for the light green layer. I used red gel colouring for the red and pink layers. I found the cakes bake to about the same colour as the batter, so colour your batter to what you want the final colour to be.
  5. Grease and line the cake tins, pour one colour into a tin, bake in the oven for 15-20 minutes, I found 18 minutes was perfect. I checked readiness with a toothpick. I was abe to bake 2 layers at a time as I had 2 tins
  6. Allow the cake to cool in the tin for 5 minutes, before turning out onto a cooling rack. I left the baking paper on the base of the cakes. I found this made moving them around for assembly easier with the baking paper on
  7. Wash the cake tins, and repeat until you have all the 6 layers completed. The cake baking can be done in advance, so at this stage you could freeze the cake layers ready for assembly on another day
  8. This step is optional but does give the cake a little more wow factor. Trim the edges of your cake. You can either use a round cake cutter (it's a bit like a cookie cutter but much larger) or take a bread and butter plate that is just slightly smaller than your 20cm cakes. Place the plate on top of the cake and use the plate-edge as a guide to trim the cakes with a knife. 
  9. Prepare the buttercream icing. The butter must be at room temperature and soft, but you do not want it melted either
  10. Cube the softened butter and beat until it is as white as possible
  11. While the butter is beating, sift the icing sugar and bring the milk out of the fridge so it comes up to room temperature
  12. Add approximately 1/3 of the sifted icing sugar to the butter, beat. Then add approximately 1/3 of the milk and beat
  13. Alternate adding the sugar and milk until it has all been added
  14. Check the consistency of the buttercream, you can add a little more milk if you feel it needs to be softer to work with
  15. Find a large plate or cake board (the plate or board you plan on presenting the cake on
  16. Place a little  buttercream in the center of the plate/board and lie the dark green layer on top, the buttercream at the bottom will help to make the cake more stable
  17. Fill a piping bag with a large nozzle with buttercream. Use the piping bag to pipe a spiral of buttercream on top of the dark green layer, you want the entire layer to have an even spread of buttercream. You could use a spatula if you prefer to add an even/thick layer of buttercream
  18. Place the light green layer of cake on top, and again completely and evenly cover the top of the light green cake. Repeat in the following order: Dark Blue, Light Blue, Red, Pink. Before you add the final buttercream layer to the top of the cake, take 3 bamboo skewers and insert them into the cake from the top down, this will help hold the cake together.
  19. Decorate the top of the cake with blue, red and green m & ms and the PJ mask figurines, scatter any leftover m & ms around the cake
  20. Serve the cake. Don't be nervous about slicing it. I find the easiest way is to tdo a slice from top to bottom. But then slide your knife between layers to pop them apart and lift out on to plates

Notes

  • I use gel food colouring as I find the colours more vibrant, and you need less
  • Buttercream ratios are 125g butter : 1 1/2 Cup icing sugar : 40 mls milk (I needed 5 quantities of buttercream, but there was some left over, so you may get away with 4, depending on how thick you apply it)
  • Icing sugar is also known as confectioners sugar or powdered sugar
  • 340g cake mix is a 1 pound cake mix
  • I used Betty Crocker Vanilla Cake Mix

Courses Baking

Cuisine Birthday Cake

Recipe by My Kids Lick The Bowl at https://mykidslickthebowl.com/pj-masks-cake/